Internal Tube Washer | MSD-ITW
Manufactured to clean the inside of tubes and cylinders prior to reassembly. Our tube washer uses ATF or any other hydraulic fluid for washing and flushing thus eliminating the need for rinsing. The washer rolls easily, on four casters, and is positioned at the end of our Disassembly Benches that is used to hold the cylinder.
Key Features
- Our tube washer is positioned directly under the cylinder end. The splash shield (A) prevents oil spray and mess and easily swings up and out of the way for ease of cylinder positioning.
- Pneumatic drive unit (B).
- A dual self-retracting nylon hose assembly (C) keeps the air and oil lines off the floor and conveniently stored for a safe working environment.
- Large 10-micron secondary filter (D).
- Air-powered twin-diaphragm pump (E) delivers 6 GPM @ 100 PSI for thorough washing, cleaning and flushing.
- Pilot-operated air valve (F) automatically starts the air pump when the trigger is pulled on the drive unit.
- Air inlet (G) to provide power for fluid washing and rotational drive.
- Drive extensions (H) are supplied in 48” and 96” lengths and are easily assembled with locking quick-disconnects.
- A small brush holder and complete set of brushes (I) from 3” to 7” diameter are supplied.
Three Stage Filter System
The first stage is a heavy duty, 40-micron filter roll (J) that can be advanced to expose new media as contaminants build up in the roll. The second stage is a magnetic sheet (K) under the filter roll to remove the larger ferrous materials. The final stage is a 10-micron spin-on hydraulic filter (L) in the lower cabinet. It cleans the oil coming out of the pump, prior to washing and flushing the cylinder tube.
Long Wall Tube Cleaner | MSD-ITW-LW
We built the MSD-ITW-LW to clean the inside of tubes and cylinders prior to reassembly. It’s an air-powered system designed to clean with brushes and a solvent. Its capacity is from 10 to 100′ in length, and bore diameters from 3 to 12″.
The MSD-ITW-LW (long wall) system is similar to our standard internal tube cleaning system. The standard MSD-ITW contains a 20 gallon solvent tank with an air powered solvent pump and 10-micron filtration. You can order it with a pneumatic drive, extensions and brushes for shorter cylinders up to 10 ft long. The long wall system uses a modified MSD-ITW tank assembly with the air-powered head to clean out cylinders up to 100 ft long.
Cleaning large and long cylinders is much easier with the The MSD-ITW-LW. Our air-powered package is a user friendly and safe way to remove honing oil and machining debris from long tubes.
We can build the MSD-ITW-LW in special sizes to meet your needs.
- Large wash head 6” to 12” diameter with a variable speed air motor.
- Small wash head range 3” to 6-1/2” diameter with a geared air motor.
- Twin 3/8” hose reel with 50-foot capacity mounted on extension stand.
- Interchangeable brush holder with six brush slots.
- Front brush holder for blind bores.
- Modified MSD-ITW-LW tank assembly.
